RTK GNSS
specifications |
Price |
Click ->
[ iG8
Kit Pricing ]5
for pricing.
[
iGage Factory is available OAC
] |
GNSS
Engine |
Trimble
BD-970: fully enabled tracking: L2C, L5, GLONASS L3,
Precise RTK, Everest, 50-Hz |
GNSS
Measurements |
200+ Channels, 6
constellations, All-in-View Tracking Standard, 50-Hz
Rate
GPS
L1C/A, L1C, L2C, L2E, L5
GLONASS
L1 C/A, L1P, L2 C/A, L3 CDMA6
Galileo
E1, E5A, E5B, E5AltBOC
BeiDou
B1, B2
QZSS L1 C/A, L1 SAIF, L2C, L5
SBAS L1 C/A, L5; WAAS, EGNOS, MSAS |
RTK Performance1 |
Horz 8 mm + 1 ppm RMS
Vert 15 mm + 1 ppm RMS |
Post-Processing
Static Performance1 |
Horz 2.5 mm + 0.5 ppm RMS
Vert 3.5 mm + 0.5 ppm RMS |
SBAS
Performance |
Horz 0.3 m RMS with WAAS in the United States
0.5 m RMS with QZSS, EGNOS, GAGAN |
GNSS
Antenna |
IGS
robotic absolute type-mean-calibration
”IGAIG8 NONE” |
RTK Initialization4 |
Signal Reacquisition
< 2 seconds (leaving full obstruction to clear
sky)
Warm Start < 30
seconds (ephemeris and last position known)
Cold Start < 45 seconds (no ephemeris or
known position) |
Protocols |
RTCM 2.3, RTCM 3.2, CMR,
CMR+, sCMRx
NMEA 0183: GSV, AVR, RMC, HDT,VGK, VHD, ROT, GGK, GGA,
GSA, ZDA, VTG,
GST, PJT, PJK, BPQ, GLL, GRS,GBS
HCN and RINEX output for
GNSS raw data |
Network |
Wi-Fi Client, Data Collector Internet: NTRIP
and DIP connections;
6 TCP/UDP Clients, 4 TCP Server / NTRIP Caster |
Communication |
Wi-Fi: 802.11 b/g/n;
fully configurable via Web Interface
SERIAL: One RS232 High Speed Serial port (7-pin LEMO)
USB: Standard High Speed USB Mini Connector, iG8 mounts
as a high-speed thumb drive
Bluetooth: Integrated multimode Class 2. iOS, Android,
Windows Mobile and
Windows Desktop compatible
UHF: Internal 1-watt Satel Transmit / Receive UHF
modem: 403-473 MHz;
TrimTalk, EOTT, SATEL |
Physical |
Size: 5.31” diameter x
4.17” high; Weight: 2.37 lbs., 2.85 lbs. with batteries
Operating temperature: -40°F to 165°F; Storage
temperature: -40°F to 185°F
Humidity: 100% condensation
Vibration: Mil-Std-810G
Waterproof and dust proof: IP68 water-resistant to 1.5m
for 30 minutes
without extra caps or covers
Case:
Cast
AZ91D magnesium alloy, stainless 5/8” 11 TPI pole
mount, double-seal gaskets
Shock: survives a 3-meter
drop to concrete; connectors mechanically & dust cover
protected |
LCD
Display |
OLED 128 x
64 1.5” Sunlight Readable with Next and Enter buttons |
Electrical |
Power consumption: 3.2
watts as a rover
Lithium-Ion battery capacity: qty 2 x 3,400 mAh 7.4 V
standard batteries,
50.3 Wh, hot-swappable
Battery Life2: 9 hours 47
minutes UHF rover, up to 11 hours 20 minutes DCI RTK rover
External Power: input
accepts 12 to 36 VDC; heavy duty external power cable
included with Base/Rover and Base kits |
Storage |
Internal Flash: 27-GB over 300-days storage at 1 Hz, 14-years with 5-second
epochs3
Unlimited expansion with
external flash drive |
Data
Collection Software |
Works best with GeoMax
X-PAD Ultimate. Also works with Carlson
SurvCE, SurvPC versions 5.09 thru 6.08; MicroSurvey FieldGenius;
CHCNav LandStar 7; GNSS Tools
Android Configuration Application |
Warranty |
1-year
iGage warranty; accessories 1-year; batteries 90-days |
1
Precision and performance values assume a minimum of
9-satellites in multipath clear, EMI free, obstruction
free environment with reasonable atmospheric conditions
and satellite geometry. Network based solutions based on
shortest actual baseline. Post-processed accuracy is
dependent on baseline length and time-on-point, 24-hour
observations may be required. Stable mounts and
generally accepted survey practices are required for the
highest order survey results.
2
Battery life varies with temperature and battery age. An
external power source is recommended for static
occupations lasting longer than 8-hours and base
operation longer than 4 hours. Elevated and extreme cold
working or storage temperatures (> 85°F, <-20°F) hasten
capacity loss.
3 Assuming 14-tracked satellites.
4
Initialization times assume reasonable baseline,
constellation and number of SV’s in a multipath and
obstruction clear environment.
5
Price includes Ground Shipping to most USA address.
6
There is no public GLONASS L3 CDMA ICD, receiver is not
guaranteed to be fully compliant with this signal.
Prices, specifications and
descriptions are subject to change without notice.
Please call us for the latest information and a written
quotation.
FCC ID
SY4-A01010. A FCC
license is required for UHF base (transmit) operation.
|
|
|